Epson xp 410 ink cartridge replacement

[WTS] custom Pena Caballero with mokuti clip and Saga Last repost [W] paypal

2023.06.10 03:15 Player1Dad [WTS] custom Pena Caballero with mokuti clip and Saga Last repost [W] paypal

Looking to sell in continental US for now. Trying one last time to see if someone wants to grab these.

Looking to sell my awesome little kniferino. There isn't much to say but this is a sharp and sharp looking little knife with a custom slip. I haven't had the heart to carry it and so I want to move it along I believe I'm the second owner but I'm unsure. B just to be safe but it looks nice. Knife and slip only. Looking for Now $625 (no trades) I'm on mobile so pm/direct message is better than chats.
https://imgur.com/a/djsWqxn (new time stamp)
https://imgur.com/a/NC0wl15 I thought some natural light would help show her off.
https://imgur.com/a/glacKTE

also looking to sell this saga. As you can see from the pics I don't really use it and thought I'd pass it along. Nice condition and a bit of blue to boot. Asking $250 shipped. The black ink in the pen has mostly dried but replacements are easy, I have not tried the blue cartridge. I would rate this a B as it's been around a while. Let me know if you have any questions. I have two on other subs as well.
https://imgur.com/a/jVnHN2s
https://imgur.com/a/BQL04C9
https://imgur.com/a/OVWPk8w
https://imgur.com/a/lOGI8CP
submitted by Player1Dad to Knife_Swap [link] [comments]


2023.06.09 21:27 144ever How to Repair and Replace the Epson WF-7710 WF-7720 Ink System

How to Repair and Replace the Epson WF-7710 WF-7720 Ink System submitted by 144ever to fixmyprinter [link] [comments]


2023.06.09 04:41 Virtual-Strawberry26 Experts please help.

I need a new printer. And I think I’m going to try an ink tank one because I’m so tired of paying through the teeth for cartridges. I just need something that can serve as a solid home printer with occasional document output of 30-50 pages every now and then.

It will be much appreciated if you have any info whatsoever, please share, or tell me why or why not I should or shouldn’t select something.

My research has led me to believe these are good options.

*Epson Eco Tank 8500 – This one seems awesome. I don’t necessarily need a printer that prints great pictures, but it seems like it would be really cool to have this option. And I assume this is a decent all-in-one printer that will do fine printing normal documents too.

*Hp Smart Tank 7002

*Canon Pixma MegaTank G7020

*Epson Ecotank 4850

*Epson Ecotank Pro ET-5170
submitted by Virtual-Strawberry26 to printers [link] [comments]


2023.06.08 18:33 lefthandedsnakey Cartridge Needle & Ink Organization

I’m taking a look at how I organize all my gealooking at duffel bags and stuff, i’m curious as to how you guys organize your cartridges or you happen to travel often. I take home a lot of my stuff every day, to make sure nothing could ever get stolen (can’t too poor to replace lol), used, etc. I am in need of a better solution for storing inks, my needle organization works okay but i just got a bunch more needles and i’ve run out of space, so i figured i’d ask and see if there’s a better way for me to do it than i currently am. I was looking into a duffel to replace the red milwaukee packout crate i’m currently using to take my stuff to and from the car
submitted by lefthandedsnakey to TattooArtists [link] [comments]


2023.06.08 10:59 powerpointc The Ultimate Guide to Compatible Cartridges: Affordable and Environmentally Friendly Printing

Introduction
In today's digital age, where printing remains an essential part of our lives, finding cost-effective and environmentally friendly printing solutions is becoming increasingly important. One such solution gaining popularity is the use of compatible cartridges. In this blog, we will explore what compatible cartridges are, their benefits, and how they can save you money without compromising on quality. So, let's dive in!
What are Compatible Cartridges?
Compatible cartridges, also known as generic or third-party cartridges, are ink or toner cartridges manufactured by companies other than the original equipment manufacturer (OEM). These cartridges are designed to be compatible with specific printer models and provide similar quality and performance at a lower cost.
Benefits of Compatible Cartridges
2.1 Affordability: Compatible cartridges are typically more affordable than OEM cartridges. Since they are produced by third-party manufacturers, they can offer competitive prices while maintaining quality. This makes them an attractive option for businesses and individuals looking to reduce printing costs.
2.2 Quality and Performance: Compatible cartridges have come a long way in terms of quality. Reputable manufacturers invest in research and development to ensure their cartridges meet or exceed industry standards. They use high-quality components and inks that deliver sharp prints, vibrant colors, and consistent performance.
2.3 Wide Compatibility: Compatible cartridges are available for a wide range of printer models from popular brands. Whether you own an HP, Canon, Epson, Brother, or another printer brand, chances are there is a compatible cartridge option available for your specific model.
2.4 Environmentally Friendly: Choosing compatible cartridges can contribute to sustainable printing practices. By opting for these cartridges, you reduce the demand for new OEM cartridges, which reduces e-waste. Additionally, some compatible cartridges are made from recycled materials, further minimizing their environmental impact.
Tips for Choosing Compatible Cartridges
3.1 Research Reputable Brands: To ensure the best quality, it's essential to choose compatible cartridges from reputable brands. Look for manufacturers with positive customer reviews, certifications, and a track record of producing reliable products.
3.2 Check for Warranty: Reputable compatible cartridge manufacturers often offer warranties or guarantees on their products. This provides assurance that the cartridges will work as expected and protects you in case of any defects or issues.
3.3 Compare Prices: While compatible cartridges are generally more affordable than OEM cartridges, prices can vary among different brands. Take the time to compare prices and consider the cost per page to determine the best value for your printing needs.
3.4 Read Customer Reviews: Before purchasing compatible cartridges, read customer reviews to gain insights into the experiences of other users. This will help you gauge the quality, reliability, and compatibility of the cartridges with your specific printer model.
Best Practices for Using Compatible Cartridges
4.1 Follow Installation Instructions: Carefully follow the installation instructions provided by the cartridge manufacturer. Improper installation can lead to printer malfunctions or poor print quality.
4.2 Update Printer Firmware: Keep your printer's firmware up to date. Printer manufacturers often release firmware updates to ensure compatibility with various cartridges, including compatible ones.
4.3 Store Cartridges Properly: If you buy compatible cartridges in bulk, store them properly in a cool and dry place. This helps maintain the ink or toner quality and prevents clogging or leakage issues.
4.4 Monitor Print Quality: Keep an eye on the print quality when using compatible cartridges. If you notice any issues, such as streaks, faded prints, or smudging, perform print head cleanings or consider contacting the cartridge manufacturer for assistance.
Conclusion
Compatible cartridges offer an excellent alternative to OEM cartridges, providing affordability, quality, and compatibility for your printing needs. By choosing compatible
submitted by powerpointc to u/powerpointc [link] [comments]


2023.06.08 06:17 Office_Jet_Printers Troubleshooting Guide for HP OfficeJet Pro 6230e Printer: Common Issues and Solutions:

Troubleshooting Guide for HP OfficeJet Pro 6230e Printer: Common Issues and Solutions:
The HP OfficeJet Pro 6230e Printer is a versatile and reliable printer that offers efficient performance for small office and home office environments. However, like any electronic device, it may encounter issues that can disrupt your printing tasks. In this blog post, we will provide you with a comprehensive troubleshooting guide to help you resolve common problems that you may face with your HP OfficeJet Pro 6230e Printer. By following these steps, you can quickly troubleshoot and resolve issues, ensuring smooth and uninterrupted printing.

Troubleshooting Guide for HP OfficeJet Pro 6230e Printer
HP OfficeJet Pro 6230e Printer Not Printing:
If your HP OfficeJet Pro 6230e Printer is not printing at all, follow these steps to troubleshoot the issue:
· Power connection: Verify that the printer is securely connected to a power source and turned on. If necessary, try connecting the printer to a different power outlet.
· Ink levels: Check the ink levels in the cartridges. If any cartridges are empty or low, replace them with new ones.
· Paper tray: Ensure that the paper is loaded correctly in the paper tray and is not jammed. Set paper guides to match the paper size.
· Print queue: Check the print queue on your computer to ensure there are no pending print jobs. If pending then cancel them or try printing again.
· Restart the printer: Sometimes, a simple restart can resolve minor glitches. Turn off your printer and unplug it from the power source, wait for some seconds, and then plug it and turn it on.
HP OfficeJet Pro 6230e Poor Print Quality:
If you are experiencing issues with HP OfficeJet Pro 6230e Printer quality, such as blurry or faded prints, follow these troubleshooting steps:
· Ink levels: Ensure that the ink cartridges are adequately filled. If necessary, replace any low or empty cartridges.
· Print head alignment: Aligning the print heads can significantly improve print quality. Access the printer's settings through the control panel or software on your computer and initiate the print head alignment process.
· Clean the print heads: Over time, print heads can become clogged, leading to poor print quality. Use the printer's maintenance or cleaning utility to clean the print heads and remove any blockages.
· Adjust print settings: Review your print settings to ensure that the appropriate print quality and paper type are selected. You can access these settings through the printer software on your computer.
HP OfficeJet Pro 6230e Paper Jams:
Paper jams can be a frustrating issue, but you can resolve them by following these steps:
· Remove jammed paper: Open the printer's access doors and carefully remove any stuck paper. Refer to the printer's manual for specific instructions to avoid causing any damage.
· Clear paper path: Check the paper path for any loose paper particles or debris. Gently clean the rollers and guides with a lint-free cloth to ensure smooth paper feeding.
· Use the correct paper type: Make sure you are using the recommended paper type and that it is loaded correctly in the paper tray.
HP OfficeJet Pro 6230e Connectivity Issues:
If you are experiencing connectivity problems with your HP OfficeJet Pro 6230e Printer, try the following troubleshooting steps:
· Check network connection: Ensure that your printer is connected to the same network as your computer. Verify the Wi-Fi or Ethernet connection and ensure there are no connectivity issues.
· Restart router and printer: Power off your router for a few seconds and then turn it back on. Wait for the router to establish a stable connection, and then restart your printer.
· Update printer firmware: Check for any available firmware updates for your printer model on the HP support website. Install the updates as instructed to resolve any known connectivity issues.
Conclusion:
With this comprehensive troubleshooting guide, you can effectively address common issues that you may encounter with your HP OfficeJet Pro 6230e Printer. By following the steps outlined above, you can resolve problems related to printing, print quality, paper jams, and connectivity. If the issues persist after troubleshooting, it is recommended to consult the official HP support website for further assistance. Remember to keep your printer firmware updated regularly and perform regular maintenance to ensure optimal performance and longevity of your HP OfficeJet Pro 6230e Printer.
Contact us:
For more information visit https://www.officejetprinters.com/ or call toll free number tel:+1(800)6738163
submitted by Office_Jet_Printers to u/Office_Jet_Printers [link] [comments]


2023.06.07 19:40 jambo_1983 Using UK printer in Canada

My friend has just moved to Canada and has been using an HP printer from the UK. He has now had to replace the ink with the Canadian equivalent but it isn’t recognised. HP support via chat won’t help as the device is out of warranty. Any way to make the cartridges work?
The printer is an Officejet Pro 6970. The UK cartridges were the 903/907. The Canadian cartridges are 902, as advised by HP live chat.
submitted by jambo_1983 to Hewlett_Packard [link] [comments]


2023.06.07 09:16 14g0t Bloons TD 6 - Update Notes! Version 37.0

Bloons TD 6 v37.0 - Update Notes!
Rolling out now on iOS, Android, Steam please restart your storefront or be patient if it does not appear for you, these updates can take some time to be rolled out to every region due to how the storefronts are set up.
Key New Features
New Awesome

Game Changes / Additions
Quest Changes
Bug Fixes & General Changes
Tower Specific Fixes
Ice Monkey
Monkey Buccaneer
Monkey Ace
Banana Farm
Engineer
Beast Handler
Hero Specific Fixes
Obyn Greenfoot
Psi
Geraldo
Platform Specific fixes
Balance Changes
Boomerang Monkey
This part has to be included along with the Lych Soul rework with Paragons which is finally making it in this update after necessary delays. As Boomerang Paragon’s knockback hits so many times so quickly, we need to make it more reasonable when applied to targets that aren’t immediately destroyed.
Bomb Shooter
MOAB Assassin fills a useful role of a pure long cooldown ‘single target assassination’ in the game, but when compared to something like First Strike it feels a little lacking that it is unable to carry damage through MOAB Layers
Tack Shooter
Blade Shooter has always struggled to find much value without MK or as a step to Maelstrom, so to give it build value on its own we feel like this should be a part of the base value on the upgrade.
Ice Monkey
Lowest tiers of ice monkey are far too effective for their cost against ceramics, with this scaling well all the way to round 100, we feel like ice duration against ceramics needs to be reduced to counter this but for now this reduction will only apply until T3.
Glue Gunner
The Bloon Solver’s rework has been very popular, however, we’d like to have a better lead up into the new mechanics by introducing this earlier at the tier 4 now.
Sniper Monkey
This will allow Cripple MOAB to take out regular MOAB layers in one shot until round 100; for such a slow attacking single target tower we feel this will help top path flex, even if mostly for show.
Monkey Buccaneer
Reworking Grape Shot crosspathing as it gains far too much crosspath value by T2 but then is lacking in purpose at higher tiers, double shot will only work as one extra grape however Destroyer will now apply its full attack rate buff to the grapes and Flagship will equip aspects of Grape Shot on the mini planes.
Monkey Ace
Spectre is shifting a little of the ceramic bonus around into basic all damage at the cost of reduced pierce, which should make up for lack of single target damage while also making the pierce crosspath more necessary when being used for cleanup focus.
Heli Pilot
Even with the map-range advantage, rotors are weak compared to any other constant AoE circle like this. Chinook feels like it’s near a place we are happy with now, however we want another tiny nudge on cost while keeping cash generation value the same. Pushing some higher values on the last Comanche Commander changes as the missile attack is effectively such a small portion of the tower’s total damage late game.
Mortar Monkey
As the Rapid Reload crosspath has actually fallen behind in value compared to Burny Stuff for top path Mortars we want to try a slight stun duration increase as this buffs the base path with a larger benefit to Rapid Reload mortars as a stalling option. Mortar consistency is lacking at x3x making it tough to spend on even though x4x is fairly good, so some of the T4 rate is shifting down to help out with this. As the camo property has grown quite weak and currently Signal Flare is considered the best decamo tool, we want to push back slightly on its cost and by reducing the blast radius of the decamo area while emphasizing crosspathing for effectiveness there.
Super Monkey
As Engineer sentries do this already, newly spawned Mini Avatars from temples will now by default match the target priority of the temple.
Ninja Monkey
We’re changing the Ninja Monkey Paragon’s focus as a fighter against camo, as we feel like a greater strength and tactical value against camo will be the full reveal of all camos rather than all camo removal.
Alchemist
Alchemist Transforming Tonic is in a weird spot with the transformation unable to attack through walls when the base alchemist is able to. Also with this, including a QoL fix for the T5 that currently prevents transformed towers from functioning with target priority.
Druid
While the tornado doesn't do anything to MOABs, it still spends itself on them which wastes a relatively long cooldown, so addressing this flaw. Avatar of wrath doubles the base attack speed before any scaling is applied, but this hasn’t ever applied to the 205 Lightning, so taking care of that as well. Housekeeping - even deep in the forest, it does actually make life better.
Spike Factory
We’ve heard the feedback, so Spiked Mines get a tweak to get more mines exploding but with less pierce on each, to overall increase quality of life in more frequent use but less wasted pierce. This will help out with some of the problems it has scaling into late game super ceramics.
Monkey Village
A minor QoL for cheap Monkeyopolis creation, we included a small base amount of cash production to the generation formula.
Engineer
The 005 crosspath fix in the last update left XXXL Trap slower than previously even if crosspathed to 205, so we are increasing that base 005 slightly to match up the 205 crosspath again so that it isn’t any slower than before.
Beast Handler
As our newest tower to be added to BTD6, we went over feedback for every path and made a large number of adjustments addressing a variety of points.
Gwendolin
Removing the stacking aspect of Gwendolin’s burn damage over time, but increasing the damage as she levels up so that it actually scales up in power now.
Adora
While they are complicated individuals, Adora can now fully appreciate the sacrifice of the newest Monkeys in the struggle against the Bloons.
Admiral Brickell
We aren’t happy with strats that start looking like exploits with frequent sell-replace loops.
Psi
Psi’s stalling out of the end of round is an odd mix of useful / annoying / out of control, so we are for now capping this to a 3 seconds of overtime stalling. Psi’s Psychic Blast ability also has weirdly low pierce for a long cooldown ability with no damage, we are increasing the base pierce greatly but it no longer increases in pierce at Lv7 since the extra pulse brings more pierce anyway.
Event / Boss / Relic / Knowledge
Looking Forward
Five months of 2023 done and dusted, which feels to us like it has zoomed by, perhaps because the Auckland office where the BTD6 team is based has only just reopened after the severe flooding at the end of January. All of Update 36 and the majority of Update 37 were completed while again working from home, but we’re very excited to have the office repairs done, the flood wall almost finished, and the ability to work shoulder to shoulder again on fun new things for the monkeyverse! Here’s the latest gaze into the crystal ball:
submitted by 14g0t to NoRules [link] [comments]


2023.06.07 02:21 NoSneezePlz Bloons TD 6 - Update Notes! Version 37.0

Bloons TD 6 - Update Notes! Version 37.0
https://preview.redd.it/0ko9r0ktoh4b1.png?width=840&format=png&auto=webp&s=d366457be60997a8f03ca838d5c3eacef9cacf8d

Bloons TD 6 v37.0 - Update Notes!

Rolling out now on iOS, Android, Steam please restart your storefront or be patient if it does not appear for you, these updates can take some time to be rolled out to every region due to how the storefronts are set up.
Check out the more awesomer update video here.

Key New Features

  • New Paragon - The Magus Perfectus! (loves casting spells) Some of you know we teased this last year, but we needed more time to balance the art and design required to make this extra special, so we are very pleased to get this live! Wizard Monkey’s Paragon is designed to be a higher level strategic Paragon with powerful ability usage similar to the Doomship.
    • The core of the Magus is a toggle to and from a Draining Beam which deals very small single target damage but absorbs graveyard mana as it damages and destroys Bloons
    • While toggled off from the Drain Beam, Magus attacks with a powerful Arcane Spike that deals massive damage to MOABs and revives Bloons it slays, while a Dark Phoenix circles overhead attacking with Firebomb breath and a radial fireball attack
    • Phoenix Explosion Ability: can be cast to consume the Paragon’s entire graveyard to set all Bloons on screen on fire for 30 seconds and summon one Zombie ZOMG for every 9000 graveyard mana consumed
    • Arcane Metamorphosis Ability: can be used to consume all graveyard mana and transform the Magus briefly into an alternate form which decimates everything with a flame cascade attack; Metamorphosis lasts longer the more mana it consumes
    • Magus was designed for armchair play so it will fill and consume graveyard mana on its own, but our goal was to create more actively controlled Paragon for those who will enjoy microing between Beam on and off and choosing which awesome Ability to unleash and when

New Awesome

  • Happy Birthday BTD6 - On June 14th, BTD6 will celebrate 5 years of monkeytastic fun and strategy! We hope you’ll join us for the main menu changes, skinned Collection event, special Questing, and general celebration. Thank you for five amazing years and we’re looking forward to all the years ahead!
  • New Hero Skin - Jiangshi Sauda, a fun new cross-cultural look for Sauda brainstormed by the art team, mixing inspirations from a favorite show and Chinese folklore
  • New Map - Erosion
    • Community designed advanced map Erosion by “I am not an artist” ~ u/TheWiseTroll
    • TheWiseTroll’s original concept proposed land and water but when thinking about map colors and the little stories we think of behind each map, the concept of the polar bear walking back with the shrinking ice was too compelling to do anything else
  • New Quests
    • Birthday Party - Pop the Party Bloon as many times as you can before it escapes
    • Blade Sauda Nowhere - Try out Sauda and learn some of her skills
    • Patch’s Cheap Chimps Challenge - Beat Logs with as little cash spent as you can
    • Striken Bad - Defeat the BAD on round 100 using First Strike. The spelling hurts us, too, you’re not the only one - but we had to do it!
  • Least Cash and Least Tier Boss Events
    • We’ve heard feedback about and have been wanting to shake up Boss rules, so here we go!
    • Applying new victory conditions to Boss Events completely changes the focus while still needing the damage output and type to handle each Boss
    • Time still matters, as the secondary time score will break any ties
  • New Trophy Store Items
    • Heroes: Geraldo Pack Mule pet, Quincy Spec Ops Drop In placement
    • Monkeys: Sweden Village Flag
    • Bloons: Party Hat Bloons
    • Game & UI: Vortex Avatar, Sunset Samba 64 Mix music track, Quincy Arrows banner
    • Nexus.gg Creator Supporter Avatar - show your support for Content Creators by using the Creator Support button on the Settings screen and purchasing any IAP
  • Limited Time only {trophy items if there’s a seasonal}
  • 5 Year Anniversary Avatar, 5 Year Anniversary Banner
  • New CT Team Store items
    • Base Props: Treasure Chest
    • Icons: Overclock icon, Archmage Staff icon
    • Frames: Bloon From The Dead frame, Mage Hat frame
  • New Slider
    • Everybody loves sliders, right?
    • After lots of discussion on the team and a fair few player requests, we’ve added a ‘Projectile and Effects Scaling’ accessibility option to main menu Settings
    • This is primarily for accessibility to minimize the size and brightness of projectiles and effects, especially when the screen is crowded with Monkeys and Bloons
    • This is not directly a performance improvement feature, so please do not expect the game to run noticeably better - just noticeably cleaner
    • We tried not to remove key game state indicators but this is ultimately in player control - if you adjust the slider and effects and projectiles make it harder to play the game, please reset the slider until the game is working the way you want
    • It’s also really fun for silly screengrabs, so please post your favorites!

News - Anniversary Giveaways!


https://preview.redd.it/27pjluypoh4b1.png?width=350&format=png&auto=webp&s=265a9a9a1456e7323d224938edcbaa995cd35d3c
We would also like to formally announce that we will be doing a week of giveaways on our Twitter starting next Monday NZT to celebrate the BTD6 5 year anniversary! 5 winners will be picked randomly each day for 5 days to win an awesome prize from our merch store. This will be exclusive to Twitter so make sure to follow us here to be involved!

Game Changes / Additions

  • New Party Time game theme event!
  • Refactored how leaderboard scores are stored so that we could add Least Cash/Tiers ranking options for Boss Events
  • Bosses on spawn will now clear the map of all existing projectiles
  • Highest Round profile stat renamed to Highest Round (All Time) & added in the new profile stat Highest Round (Current Version).
  • The 4 different Highest Round profile stats are now grouped together near the top of the profile stats page
  • Freeplay budget scaling reduced slightly (same speed/hp, but number of Bloons added per round will increase at a slower rate)
  • Added a new Roundset with Income curve to be used by our events team; this customized income curve allows us more flexibility to make this roundset than would otherwise have been possible with existing roundset tools
  • Translated game into Thai

Quest Changes

  • Added a ‘Play Again’ button to the victory screen for quests
  • Added a ‘Disable Dialogue’ checkmark for some quests after beating them
  • Game hints are now hidden during Quests
  • Story Quests now sort to the top of the quest list & completed Story Quests sort to the bottom

Bug Fixes & General Changes

  • A large number of localization fixes - thanks for the player feedback on your pet peeves!
  • Resolved a number of general crashes
  • Number of additions/changes to improve existing quests, highlight scores to beat & increase our possibilities for quest creation
  • Resolved an issue with abilities highlighted in quests remaining highlighted after restarting
  • Holding down on a tower should correctly hide the UI again
  • Quests no longer play placement effects for any pre-placed towers
  • Resolved an issue that could prevent Total Damage from counting correctly to profile
  • Resolved an issue where total insta monkeys profile stat would decrease if the instas were used
  • Resolved certain very specific freeplay seeds causing crashes on certain rounds
  • Bloons Leaked summary no longer gets cleared in co-op after reviewing map
  • Stairs in the top corners on Resort are now placement blockers
  • Resolved a crash that could occur when waiting on the events screen as events end
  • Resolved a crash that could occur when the Hero Booster popup was canceling via any map mechanics forcing the player to deselect the hero
  • Fixed some towers not targeting the test bloon when set to target type Strong
  • Fixed position of the full patch notes link on update popups on some resolutions
  • Midnight Mansion plays a fishie animation in the bloon exit on loading in
  • Resolved an issue where placed items on the map lose their cosmetic skins after a resync occurs during a co-op game.
  • Obtaining towers from redistribution on co-op that are still locked for you will now show messaging in the unlocks screen as to why you are not earning XP for it
  • Pressing back from the avatabanner selection will now just back out of that selection
  • Changed Pop Count on summary screen to Damage Count and added actual Pop Count
  • Hero portraits no longer linger too long on the screen after exiting the upgrades menu in game
  • Paragon art state changes moved from 22/42/62/82 to 20/40/60/80
  • Resolved map-based buffs not inheriting to subtowers correctly
  • Resolved an issue where an external proxy could sometimes cause the game to hang on loading forever
  • Co-op red areas fade in more slowly when you cross the boundary
  • Resolved online/Invisible profile setting displaying text incorrectly
  • Audio polish when opening reward chests in the collection event
  • Updated wording on logout screen to address some confusion
  • Added a background to the rewards UI
  • Added confirmation pop-up for In App Purchases added from outside the game
  • Monklish font has been regenerated to include the Māori macrons

Tower Specific Fixes

Ice Monkey
  • Resolved a number of cases of the xx2 Refreeze crosspath not re-freezing bloons when dealing certain numbers of damage.
Monkey Buccaneer
  • xx5 Trade Empire should no longer buff too many merchants in co-op
  • Resolved tower moving from flagship to navarch displaying vfx at the wrong scale
  • Resolved "Paragon available" pip displaying for Buccaneer with only Flagship and Pirate Lord unlocked
  • Resolved an issue where Navarch’s attack rate buff would not apply to Doomship in some cases depending on build order
Monkey Ace
  • xx2 Centered Path ace no longer displays it’s placement target on screen initially when loading a save
  • Upgrading to 002 Ace no longer refreshes the cooldown on the special toggle
  • Resolved an issue with Monkey Ace jumping offscreen after a Retry Last Round
Banana Farm
  • 5xx Banana Central no longer buffs other Banana Centrals in co-op
Engineer
  • 1xx Engineers can now place their sentries correctly on One Two Tree
  • Overclocking a 5xx Engineer’s sentry just as it starts exploding no longer crashes the game
  • Engineer Paragon no longer crashes if created while a Bloontrap is being deployed
  • Engineer Paragon no longer crashes when selling the main tower while it has a sentry moving through the air that has not landed yet
  • Engineer Paragon should no longer throw sentries into the middle of the map due to techbots
  • Resolved an issue where the Paragon’s permanent speed boost per round would not load until the end of the first round played after loading a save
Beast Handler
  • 3xx Great White projectiles can no longer hit bloons far out of range
  • 3xx Great White rare crash that could occur at end of rounds has been resolved
  • 3xx Great White’s slow applied to grabbed target now expires correctly
  • 310 Beast Handler now has eyebrows, just like that one map suggestion
  • Corrected the splash asset for crosspathed 4xx & 5xx Beasts
  • Merging an Orca into a Megalodon while it's taking out a bad should no longer cause a 2nd Megalodon to briefly appear
  • x1x Microraptor no longer fails to attack in some cases when being moved to different heights
  • x4x Tyrannosaurus Rex ability now scales with Challenge Editor ability cooldown slider
  • Beast Handler's bird targeting no longer breaks when set to strong if bloons are leaving radius
  • Resolved a crash that could occur when moving a beast to the screen boundary

Hero Specific Fixes

Obyn Greenfoot
  • Resolved an issue where Obyn’s Wall of Trees when placed on an intersection looping back around on itself would not be able to hit the children of any targets that passed over it
Psi
  • Resolved a crash that could occur when attacking glued Bloons
Geraldo
  • Resolved an issue where selling Geraldo, and then re-buying him would show the description of the last-viewed store item from before selling him
Platform Specific fixes
  • PC: Beast Handler’s hotkey in the hotkeys menu has been moved up near the rest of the support towers
  • PC: Added a ‘ Monkey Special 2’ hotkey (for towers like Beast Handler, Necromancers & Ace Paragon). By default the Special 1 & Special 2 hotkeys have been assigned to PageUp & PageDown and ordered so that PageUp triggers the upper specialty, and PageDown triggers the lower one
  • Arcade: Resolved a strange one pixel wide black line that can appear above some text characters on the arcade font
  • Chromebook: Game no longer crashes if attempting to login via webview
  • Chromebook: Resolved an issue with bluetooth mice being unable to scroll

Balance Changes

Boomerang Monkey
This part has to be included along with the Lych Soul rework with Paragons which is finally making it in this update after necessary delays. As Boomerang Paragon’s knockback hits so many times so quickly, we need to make it more reasonable when applied to targets that aren’t immediately destroyed.
  • Boomerang Paragon knockback amount reduced 3 > 1
Bomb Shooter
MOAB Assassin fills a useful role of a pure long cooldown ‘single target assassination’ in the game, but when compared to something like First Strike it feels a little lacking that it is unable to carry damage through MOAB Layers
  • x4x MOAB Assassin ability passes through MOAB layers
  • x4x MOAB Assassin ability explosion centers around the impact target
Tack Shooter
Blade Shooter has always struggled to find much value without MK or as a step to Maelstrom, so to give it build value on its own we feel like this should be a part of the base value on the upgrade.
  • x3x Blade Shooter pierce increased from 6 > 8
Ice Monkey
Lowest tiers of ice monkey are far too effective for their cost against ceramics, with this scaling well all the way to round 100, we feel like ice duration against ceramics needs to be reduced to counter this but for now this reduction will only apply until T3.
  • 000 Ice Monkey freeze duration reduced by 50% on ceramics
  • All T3 Ice Monkeys increase freeze duration on ceramics from 50 > 100%
  • 203 Icicles crosspath now gains camo prio
Glue Gunner
The Bloon Solver’s rework has been very popular, however, we’d like to have a better lead up into the new mechanics by introducing this earlier at the tier 4 now.
  • 4xx Bloon Dissolver now creates puddles on track leading up to Bloon Solver, puddles deal 1 damage, all other stats and crosspath benefits are the same.
Sniper Monkey
This will allow Cripple MOAB to take out regular MOAB layers in one shot until round 100; for such a slow attacking single target tower we feel this will help top path flex, even if mostly for show.
  • 5xx Cripple MOAB damage increased from 80 > 280
Monkey Buccaneer
Reworking Grape Shot crosspathing as it gains far too much crosspath value by T2 but then is lacking in purpose at higher tiers, double shot will only work as one extra grape however Destroyer will now apply its full attack rate buff to the grapes and Flagship will equip aspects of Grape Shot on the mini planes.
  • 210 Grape Shot total projectiles reduced from 10 -> 6
  • 310 Destroyer also reduced from 10 > 6 grapes
  • 310 Destroyer now increases grape attack rate twice as much, matching increase to the regular attack
  • 410 Aircraft Carrier planes radial attack now fires an arc of grapes instead of darts
  • 410 Aircraft Carrier planes radial Emission Angle 360 > 90
  • 410 Aircraft Carrier planes radial projectile count 8 > 6
  • 410 Aircraft Carrier plane grape projectile speed 100 > 200
  • 420 Aircraft Carrier planes radial projectile art: dart > hot grape
  • 420 Aircraft Carrier planes radial damage type Sharp > Fire
  • 400 Aircraft Carrier plane radials damage 1 > 2
  • 4xx Aircraft Carrier missiles now follow tower target priority
Monkey Ace
Spectre is shifting a little of the ceramic bonus around into basic all damage at the cost of reduced pierce, which should make up for lack of single target damage while also making the pierce crosspath more necessary when being used for cleanup focus.
  • xx4 Spectre Dart damage increased 3 > 4
  • xx4 Spectre Dart ceramic bonus reduced 2 > 1
  • xx4 Spectre Dart pierce reduced 15 > 10
  • xx4 Spectre Bomb damage increased 2 > 3
  • xx4 Spectre Bomb ceramic bonus reduced 4 > 3
  • xx4 Spectre Bomb pierce reduced 30 > 20
Heli Pilot
Even with the map-range advantage, rotors are weak compared to any other constant AoE circle like this. Chinook feels like it’s near a place we are happy with now, however we want another tiny nudge on cost while keeping cash generation value the same. Pushing some higher values on the last Comanche Commander changes as the missile attack is effectively such a small portion of the tower’s total damage late game.
  • 302 Razor Rotors will now benefit from the faster firing crosspath
  • 3xx Razor Rotors cooldown rate 0.75 > 0.5
  • x4x Support Chinook price reduced from $10500 > 9500
  • x4x Support Chinook supply crate cash generated reduced $1650 > 1,550
  • x4x Support Chinook max uses per round reduced from 3 > 2
  • xx4 & xx5 Comanche mini's follow the target priority set on their main Heli
  • xx5 Comanche Commander missile damage 7 > 15
  • xx5 Comanche Commander missile moab bonus 5 > 8
  • xx5 Comanche Commander mini's missile dmg 5 > 15
  • xx5 Comanche Commander mini's missile moab bonus 5 > 8
Mortar Monkey
As the Rapid Reload crosspath has actually fallen behind in value compared to Burny Stuff for top path Mortars we want to try a slight stun duration increase as this buffs the base path with a larger benefit to Rapid Reload mortars as a stalling option. Mortar consistency is lacking at x3x making it tough to spend on even though x4x is fairly good, so some of the T4 rate is shifting down to help out with this. As the camo property has grown quite weak and currently Signal Flare is considered the best decamo tool, we want to push back slightly on its cost and by reducing the blast radius of the decamo area while emphasizing crosspathing for effectiveness there.
  • 4xx The Big One stun duration non-MOABs increased from 0.5s > 0.75
  • 5xx The Biggest One stun duration MOAB increased from 0.3s > 0.5
  • 5xx The Biggest One stun duration BFB increased from 0.2s > 0.3
  • 5xx The Biggest One stun duration DDT increased from 0.2s > 0.3
  • x3x Heavy Shells attack delay reduced from 1.08 > 0.81
  • x4x Artillery Battery attack rate buff reduced from ¼ to ⅓ (remains the same rate: 0.27)
  • xx3 Signal flare cost increased $700 > 800
  • xx4 Shattering Shells price reduced from $11,000 > 10900
  • xx3 Signal Flare decamo radius reduced from 50 > 43
  • 103 Signal Flare decamo pierce increased by 5 > 10
  • xx4 Shattering Shells burn DoT deals moab bonus +5
Super Monkey
As Engineer sentries do this already, newly spawned Mini Avatars from temples will now by default match the target priority of the temple.
  • 4xx Sun Temple's Magic Sacrifice mini Sun Avatars when placed will spawn with the same target prio as their parent tower
Ninja Monkey
We’re changing the Ninja Monkey Paragon’s focus as a fighter against camo, as we feel like a greater strength and tactical value against camo will be the full reveal of all camos rather than all camo removal.
  • Ascended Shadow now grants global camo detection for all your towers
  • Ascended Shadow no longer strips camo from Bloons with every attack
  • Ascended Shadow main attack gains bonus to camo +6
  • Ascended Shadow Flash Bomb Explosion gains bonus to camo +20
  • Ascended Shadow Flash Bomb Shurikens gains bonus to camo +16
  • Ascended Shadow Sticky Bomb Projectile gains bonus to camo +3200
  • Ascended Shadow Sticky Bomb Explosion gains bonus to camo +700
  • Ascended Shadow now deals 25% damage to all non-Boss MOABs that spawn
Alchemist
Alchemist Transforming Tonic is in a weird spot with the transformation unable to attack through walls when the base alchemist is able to. Also with this, including a QoL fix for the T5 that currently prevents transformed towers from functioning with target priority.
  • x4x Transforming Tonic transformed alchemist can now ignore line of sight
  • x5x Total Transformation towers transformed by the x5x will keep their Target Priority
Druid
While the tornado doesn't do anything to MOABs, it still spends itself on them which wastes a relatively long cooldown, so addressing this flaw. Avatar of wrath doubles the base attack speed before any scaling is applied, but this hasn’t ever applied to the 205 Lightning, so taking care of that as well. Housekeeping - even deep in the forest, it does actually make life better.
  • 3xx Druid of the Storm’s Tornado no longer targets MOAB-class Bloons
  • x3x Druid of the Jungle no longer pops Lead Bloons without 130 crosspath
  • x3x Jungle Vine follows target prio of tower instead of strong
  • x3x Jungle Vine defaults tower to strong priority when purchased
  • 205 Avatar of Wrath base Heart of Thunder attack rate increased 2.3s > 1.15
Spike Factory
We’ve heard the feedback, so Spiked Mines get a tweak to get more mines exploding but with less pierce on each, to overall increase quality of life in more frequent use but less wasted pierce. This will help out with some of the problems it has scaling into late game super ceramics.
  • 4xx Spiked Mines pierce increased from 12 > 20
  • 4xx Spiked Mines explosion pierce reduced from 40 > 30
  • 4xx Spiked Mines DoT damage increased from 1 > 10
  • 5xx Super Mines explosion pierce remains at 60
  • 5xx Super Mines DoT damage increased from 1000 > 2500
Monkey Village
A minor QoL for cheap Monkeyopolis creation, we included a small base amount of cash production to the generation formula.
  • xx5 Monkeyopolis income formula now includes a base +$2500 minimum
Engineer
The 005 crosspath fix in the last update left XXXL Trap slower than previously even if crosspathed to 205, so we are increasing that base 005 slightly to match up the 205 crosspath again so that it isn’t any slower than before.
  • xx5 XXXL Trap attack cooldown reduced from 5.8s > 4.6
Beast Handler
As our newest tower to be added to BTD6, we went over feedback for every path and made a large number of adjustments addressing a variety of points.
  • 3xx Great White thrash rate benefits from speed buffs
  • 3xx Great White damage increased 4 > 8
  • 3xx Great White max extra damage from merge increased 8 > 16
  • 3xx Great White max attack rate buff from merge increased 0.20634 > 0.38
  • 3xx Great White extra thrash knockback duration from merge increased 0.1 > 0.2
  • 4xx Orca thrash damage increased 20 > 30
  • 4xx Orca thrash max extra damage from merge increased 40 > 60
  • 4xx Orca max attack rate buff from merge increased 0.37829 > 0.38
  • 4xx Orca thrash radius increased 20 > 24
  • 5xx Megalodon price reduced from 55,000 > 45,000
  • 5xx Megalodon thrash radius increased 30 > 36
  • 5xx & x5x Beast handler paths are now overclockable
  • x4x and x5x Max Merge Bonus: Overkill damage on MOABs now distributes to the children of that target
  • xx1 Gyrfalcon path deals +1 damage to Regrows to stop accidental infinite regrow farms
  • xx3 Golden Eagle pierce increased 12 > 15
  • xx3 Golden Eagle pierce range increased 24 > 30
  • xx3 Golden Eagle ceramic pierce penalty reduced from +3 > 1
  • xx3 Golden Eagle Max Merge Bonus: Now grabs MOABs with pierce penalty +14
Gwendolin
Removing the stacking aspect of Gwendolin’s burn damage over time, but increasing the damage as she levels up so that it actually scales up in power now.
  • Lv6 Gwendonlin main attack DoT stack count 0 > 1
  • Lv6 Gwendonlin main attack DoT damage increased from 1 > 2
  • Lv9 Gwendonlin main attack DoT damage increased from 1 > 4
  • Lv10 Gwendonlin main attack DoT damage now increases by 1 per additional level
Adora
While they are complicated individuals, Adora can now fully appreciate the sacrifice of the newest Monkeys in the struggle against the Bloons.
  • Lv7 Blood Sacrifice can now be used on Beast Handlers
Admiral Brickell
We aren’t happy with strats that start looking like exploits with frequent sell-replace loops.
  • Upon Selling Brickell - all of her placed Mines are now expired along with her as well
Psi
Psi’s stalling out of the end of round is an odd mix of useful / annoying / out of control, so we are for now capping this to a 3 seconds of overtime stalling. Psi’s Psychic Blast ability also has weirdly low pierce for a long cooldown ability with no damage, we are increasing the base pierce greatly but it no longer increases in pierce at Lv7 since the extra pulse brings more pierce anyway.
  • If no Bloons are left unpopped on screen aside from ones Psi is currently holding & destroying, these Bloons will be destroyed after a maximum of 3 seconds
  • Lv3 Psychic Blast pierce increased from 50 > 200
  • Lv7 Psychic Blast pierce increased from 100 > 200
Event / Boss / Relic / Knowledge
  • All Lych Soul variations can now be stunned/slowed by paragon tier upgrades
Looking Forward
Five months of 2023 done and dusted, which feels to us like it has zoomed by, perhaps because the Auckland office where the BTD6 team is based has only just reopened after the severe flooding at the end of January. All of Update 36 and the majority of Update 37 were completed while again working from home, but we’re very excited to have the office repairs done, the flood wall almost finished, and the ability to work shoulder to shoulder again on fun new things for the monkeyverse! Here’s the latest gaze into the crystal ball:
  • Update 38 Key Content
    • New Boss - Phayze: another all new Boss concept and play style, not giving any other hints apart from the name itself
    • Summer fun: a new Brickell hero skin and a waterpark map aimed toward Intermediate to help keep northern hemisphere summer cool
    • Quests: continuing to build new quest system features and adding a few new Quests to the list
  • Update 39 Key Content
    • Map Editor: under construction since last year with internal systems testing happening during 38.0 development, we are super excited to put map creation tools in player hands on as many platforms as possible when it goes live
    • New Hero - Spirit Walker: another unique design that we’re sandboxing already to make sure it has as much balance and art iteration as possible, again no hints other than the name
  • Update 40 Key Content
    • New Paragon - Monkey Sub: we’ve tagged sub as the next Paragon, so tell the Navarch to stop hoarding all of the Portable Lakes!
    • Stretch Goals - Boss Rush Team Event and CT Themes: lots of unknowns 3 updates out but we have strong plans for a new Team event and new parameters for Contested Territory that will make each CT more dynamic - anything that we don’t get done by end of year will have strong groundwork for next year
  • Console
    • Getting closer to submission on Xbox and PlayStation but this has been slow going. We’ve added another programmer and are working even more closely with platform partners to get through our last issues and launch as soon as possible, but that’s likely at least another 2 months. Switch is still a consideration depending on response to Xbox and PlayStation, as it will require additional bespoke development.
submitted by NoSneezePlz to btd6 [link] [comments]


2023.06.06 22:36 Morocco_the_mole Yank here, is this lakaka from the European union champions 2023?

Yank here, is this lakaka from the European union champions 2023? submitted by Morocco_the_mole to soccercirclejerk [link] [comments]


2023.06.06 10:55 harambe623 Refilling Epson 812 cartridges is impossible. Did Epson win?

Anyone familiar with 812 cartridges and refilling them? Reset tools don't work. One time use chips are available on the internet, but ones from reputable sources cost almost as much as 3rd party ink cartridges (usable with rolled back firmware). Like, what's the point of filling your own cartridges if this costs you more than ready-to-go cartridges.
Has Epson really won the ink game?
submitted by harambe623 to printers [link] [comments]


2023.06.06 03:50 sindrealmost Epson SC-P600 MK/PK Channel died

Update: After what feels like 40x head cleaning runs... it is back to normal....
TL;DR:
Printer: Epson SC-P600
Assumed Issue: Air in ink line
Addendum: Economically feasable? most cartridges are low (no warning) and buying a fresh set in the hopes it solves it is not an option I am willing to take.... (read full story for reason)
Advice, solutions?
Full story:
How: MK was low (no warning) printed a nozzle check after moving printer, LLK needed cleaning, did a head clean, printed a new nozzle check, LLK fine, MK vanished completely. Since MK was low, I switched to PK since it was new and full.... nozzle check now showed PK with about 90% of the lines missing. After multiple head cleans and printing of just a black page trying to flood the PK lines with ink.... after initial changes in the pattern (no massive change) it vanished again.
On removing and reseating all cartriges I noticed MK was completely drained, not a speck left... so my assumption is that the MK was underfilled or through a fluke ran completely out to the point of letting air in....
Now, the printer is low on most inks (no warnings but still) I just popped in the last fresh VM and PK... and I have just taken delivery of my new large format printer (upgrades yay)... so it is less critical to revive the printer especially if the solution is to thrown money at the problem (which, ofc. I realise is often the case)
Anyone with similar issues? Recommendations, Advice, Solutions?
submitted by sindrealmost to printers [link] [comments]


2023.06.04 22:13 AimIsInSleepMode Test

All light bubbles shattered. The many pieces of the sharp and burning glass are stuck. You can't pull them out, because they are way too deep inside. Some pieces were manageable to pull out, but you can still tell they were stuck and it heals very slowly. The light switches were ripped out. It's so dark and the campfire which was burning bright now burned out. You can't set it on fire again, because there is no wood left. The library with it's many visitors burned down and nothing is left. The books can't be rewritten and replaced. You can't write new books, because you can't see anything without any light. Nobody wants to renovate the library. It's locked by a door with no handle. At first there wasn't a door, then something entered it and the books were cut up. Then it was a stronger, more stable door so only some things can come trough. And then it got destroyed again and the books were set on fire. The door now got replaced again, but now nothing can come in or out. Sometimes some things tried to come in, but the door won't open. It's locked.Lightning strikes again and again, destroying everything, burning everything down. Then a storm comes up and devastates everything. The rain is getting heavier and heavier and the waves get higher and higher until they completely drown you. Your heart will be flooded. You can't stop the leak and it burns and hurts like hot knives all inside you. They're not that easy to pull out. If you try, everything will get stuck on it, gnaw on it, take it for a walk. And the deep black hole pulls everything out of you with it. It takes all the light out of you, every single lamp. Then there aren't many things that will give you power with a pack of lightbulbs. The small light bulbs don't last long, don't heat up and brighten up for long. They shatter and each individual splinter is stuck and difficult to pull out. Only a few light switches light up the bulbs. But they can give you everything and enlighten everything. But if they are torn out of the wall like a heart, then every single bulb is gone and demolished. So many bookshelves have fallen over, so little is left and so much is simply destroyed or lost. They can't be repaired either. Rewriting the books won't work without ink. The pen has its last ink cartridge, the pencil has its last lead, and the feather has its last glass. And the biggest book on the biggest shelf got stabbed and cut up. New books are not often added, they are usually only a page long and not many visit the library
submitted by AimIsInSleepMode to u/AimIsInSleepMode [link] [comments]


2023.06.04 17:08 flippinmissle Epson ET 15000 DTF Conversion (wife's ambition, husbands ignorance)

Hey Guys,
Popping my Reddit cherry here lol. Long time learner, first time posting.
My wife has recently got into pressing shirts for our kids as well as some friends. She ordered some DTF's from a site online at first but is impatient for not having the "on demand" ability.
We had also talked about doing some sublimation so I had been researching, the best I could, about printers. In my research I found the Epson 15000 to be discussed pretty frequently. We found a gently used one near us that had only had sublimation ink in it so we picked it up.
My question is now she is asking me to see if we can convert it to print on DTF film even sending me a youtube link for the conversion to remove the upper roller assembly. I looked into it myself and it appears that all the conversion videos I can find are the XP model not the ET model we have.
I apologize in advance as I don't know if this is the sub for this or if there is a better one suited for my question. Please help!
P.S.- I am fairly mechanically inclined and have done several cpu hardware projects so I am not fearful of the job. My biggest worry is that the printer we bought will not be able to be converted. Note, I realize the ET model does not support white and we are ok with that.
submitted by flippinmissle to fixmyprinter [link] [comments]


2023.06.04 17:06 ang_d3 Hp ink

Hp ink
So I bought an OfficeJet pro 9019e printer around a year ago, and now my cartridges have run out of ink. So I tried to apply for instant ink, now I'm still unable to print, will they send me a new refilled cartridge, because there is no sign of it, should I wait a bit or go and them myself ?
https://preview.redd.it/8c9qy1x2o04b1.png?width=749&format=png&auto=webp&s=3d3746470ac0cf76d968eefab165a2779717ccca
submitted by ang_d3 to Hewlett_Packard [link] [comments]


2023.06.04 17:03 ang_d3 HP Instant Ink

So I bought an OfficeJet pro 9019e printer around a year ago, and now my cartridges have run out of ink. So I tried to apply for instant ink, now I'm still unable to print, will they send me a new refilled cartridge, because there is no sign of it, should I wait a bit or go and them myself ?

https://preview.redd.it/gxycfvw8n04b1.png?width=749&format=png&auto=webp&s=6c49394c1dd7dd40e90343b51547ba3ffc0e525f
submitted by ang_d3 to printers [link] [comments]


2023.06.04 04:03 GoldClick_ [WTS] Parker Vacumatic Debutante, Lady Sheaffer

Verification and gallery: https://imgur.com/a/00Q6muw Other pens I have for sale: https://www.reddit.com/Pen_Swap/comments/13o2y6j/wts_pelikan_m400_two_parker_51s/
Two more pens looking for a new home. Both are lady’s pens, and very thin, about 8mm at their grips.

(1) Parker Vacumatic Debutante - $140

Emerald Pearl finish, double end jewels, two-tone Soft Fine nib. Barrel marked to Q.3 1941. Most pens of this production era were monotone, suggesting this to be a later replacement. The top jewel (clip side) is striped, rather than the correct plain black, though the bottom jewel is correct. Very bright coloring with easy viewing to the ink level, and only mild ambering. Very tiny pen in modern terms. [B] condition
(2) Lady Sheaffer - $65 SOLD Pattern XIV (gold tulle on red barrel), two-tone Medium nib. Line is slightly thinner than a western M. Feels more like firm graphite than a Sailor nib, IMO. Will be supplied with an empty Sheaffer cartridge—use a syringe to fill it. [B] condition
submitted by GoldClick_ to Pen_Swap [link] [comments]


2023.06.03 23:17 obnf Printing film

I’m using the Epson xp 15000. My prints on film keep coming out with with a lot of ink and causes drag of ink. I’ve used two different films and got same result. When I use regular printing paper everything is fine. What can I adjust to fix this?
submitted by obnf to SCREENPRINTING [link] [comments]


2023.06.02 19:28 WorryStoner Someone donated ink that expired in 2007

Someone donated ink that expired in 2007
It was on clearance for $2.50!!
submitted by WorryStoner to Staples [link] [comments]


2023.06.02 18:24 Archangel7365 Canon MG2200 Generic Driver Help?

My Canon MG2200 Series Pixma is no longer supported by Canon. I'm... frugal... so rather than replace it I am attempting to find a driver that will work. When I attempted to download the driver from the canon website (windows couldn't find one automatically) The page froze up, and now whenever I attempt to navigate back to that page the downloads aren't there anymore and an error message stating that it's no longer supported and driver updates are no longer being made appears instead. I have attempted manually adding the printer in windows using the included generic drivers using every port imaginable - but I can't even print a test page.
Questions Answers
Printer model: Canon MG2200 Series Pixma
Print Frequency: Less than monthly
Firmware version: UNKNOWN
Connection: USB
Current OS: Windows 10
# of Machines Tried: 1
# of Users Tried: 1
Applications Tried: 8
Error Messages: None
Cartridges Used: Original Ink

What steps you have already tried?

Pictures:

(Do you have pictures of the print quality, the printer and or error messages?)
submitted by Archangel7365 to printers [link] [comments]


2023.06.02 16:26 benlinf HP Deskjet 3050a not printing black

Hi all,
I've been searching Google for quite some time now but can't find a solution.
My Grandmother has a HP Deskjet 3050a all-in-one printer. We changed the cartridges, as they were low, but, now can't print anything with black.
The alignment page prints fine after installing the ink (including the black parts) but, when scanning the alignment page, it says it can't detect it so fails.
The printer has some built in games (Sudoku, tic tac toe, etc) which print black just fine, as does the alignment page itself. Scanner works fine scanning to PC, so don't think there are any issues there. Just the alignment page not being detected by the scanner.
Don't know if the two are linked. All the "solutions" I've found so far all point to the same support page for HP and none of them change anything as they only address print quality issues, not the alignment failing or the black not printing at all.
The ink monitor does not show anything for the black cartridge either, tried several new ones, all show no ink.

Should we just replace the whole thing at this point or does anyone know of a way to fix this?
TIA
submitted by benlinf to printers [link] [comments]


2023.06.02 01:13 Player1Dad [WTS] Custom Pena Cabellero (Mokuti!) and Grimsmo Saga

Looking to sell my awesome little kniferino. There isn't much to say but this is a sharp and sharp looking little knife with a custom slip. I haven't had the hear to carry it and so I want to move it along I believe I'm the second owner but I'm unsure. B just to be safe but it looks nice. Knife and slip only. Looking for $700 (no trades)

https://imgur.com/a/glacKTE

also looking to sell this saga. As you can see from the pics I don't really use it and thought I'd pass it along. Nice condition and a bit of blue to boot. Asking $300\ $275 shipped. The black ink in the pen has mostly dried but replacements are easy, I have not tried the blue cartridge. I would rate this a B as it's been around a while. Let me know if you have any questions. I have two on other subs as well.
https://imgur.com/a/OVWPk8w
https://imgur.com/a/lOGI8CP
submitted by Player1Dad to Knife_Swap [link] [comments]